Brada Mf-305 Upright Zer Manual
Metal Slug Anthology (called Metal Slug Complete is a video game compilation for the playstation 2, PlayStation Portable and the Wii. The game also marks the return of SNK Playmore as a third-party developer for a Nintendo console since the SNES era. PPSSPP is a PSP emulator (PlayStation Portable) that can run games created for Sony’s first portable console. The Wii version boasts different controller configurations, most taking advantage of the Wii Remote, but the Classic Controller is not supported.
• ROWER 305 OWNER’S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner’s manual for future reference.
• TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS BEFORE YOU BEGIN ASSEMBLY INSTRUCTIONS OPERATION GUIDE STORAGE MAINTENANCE EXERCISE GUIDE EXPLODED DIAGRAM PARTS LIST WARRANTY ROWER 305. We recommend that two people be available for assembly of this product. Keep children away from the Rower 305.
Brada mf 305 upright freezer manual - Google Apps - Free manuals TOA Electronics, Sorted Size. Brada upright zer manual TexPaste. Home Map Contacts. Freezer capacity Upright freezer with 6 drawers Outside condenser Door reversible Power and temperature indicator lights warning Warranty: 1 Year parts and labour Digital Exterior Control Center Exclusive to The Brick.

Do not allow children to use or play on the Rower 305. Keep children and pets away from the Rower 305 when it is in use. The Rower 305 should not be used by persons weighing over 250 pounds.
The Rower 305 should be used by only one person at a time. The Rower 305 is for consumer use only. It is not for use in public or semipublic facilities. BEFORE YOU BEGIN Thank you for choosing the Rower 305. ASSEMBLY INSTRUCTIONS HARDWARE IDENTIFICATION CHART ROWER 305. Lay the Centre Beam Assembly on the floor as shown in the illustration. Now refer to the drawing.
Make sure the Key Rib in the STABILIZER CAP (12) aligns with the slot in the REAR SUPPORT (45), then press the STABILIZER CAP(12) onto the REAR SUPPORT(45). • UPRIGHT (3) after cutting off the Cable Tie.
Hold the HANDLEBAR (9) and cut off the Cable Tie which ties the HANDLEBAR (9) to the UPRIGHT (3). Swing the UPRIGHT (3) up and place the HANDLEBAR (9) on the HANDLEBAR HOLDER (50). Attach the UPRIGHT (3) to the FRONT STABILIZER (2) with BUTTON HEAD BOLTS (M8x1.25x15mm) (14) and WASHERS (M8) (16).

Tighten all the bolts from Step 2. Slide the PEDAL CAPS (4) onto both ends of the PEDAL SHAFT (5) and secure with BUTTON HEAD BOLTS (M8x1.25x15mm) (14) and LARGE WASHERS (M8) (15). NOTE: You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS (M8x1.25x15mm) (14) at both ends of the PEDAL SHAFT (5) at the same time.
Slide the SEAT ASSEMBLY(10, 60) onto the CENTER BEAM(1). Insert the SCREW ROD(34) through the CENTER BEAM(1) and screw the SEAT STOPPERS(40) onto both ends of the SCREW ROD(34). Press the CENTER BEAM CAP(11) into the back end of the CENTER BEAM(1). Install one AA battery into the METER (6), the battery is not included.
See below for detailed battery installation instructions. Insert the SENSOR WIRE (7) into the METER (6). Slide the METER (6) onto the BRACKET (25).
OPERATION GUIDE ROWER 305. • Do not use the Seat to move the easy glide rower. The Seat will move and the Seat Carriage may pinch your hand or fingers 4. Refer to the illustration. You can stand the easy glide rower on end for storage. Keep your easy glide rower be cleaned by wiping it off with an absorbent cloth after use. Check the condition of the ROPE (51).
Replace the ROPE (51) if it is cracked or broken. • SHOCK (42), refer to illustration A. Then entwine the ROPE (51) around the BOLTS (M6x1x20mm) (64) using a figure eight pattern and tighten the bolts so the ARC WASHERS (M6) (65) press against and secure the ROPE (51) in position.
Re-attach the HANDLEBAR COVER (52) with the SCREWS (M4x15mm) (49). • 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart rate zone.
As your aerobic capacity improves, gradually increase the intensity of your workout by increasing your heart rate. • Warm-up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope and running on the spot.